# Gravel Calculator

> Calculate how much gravel you need for driveways, paths, and sub-bases. Instant results with tonnes, bags, and cost estimates for any area.

Canonical: https://renoquant.com/gravel-calculator
Prices updated: 2026-03

## How to Calculate Gravel for Paths, Driveways and Sub-bases

Gravel is used for two very different purposes: as a structural sub-base under paving, and as a decorative surface for paths and driveways. The calculation method is the same for both, but the depth and gravel type differ. This guide covers both scenarios.

### The Gravel Formula

**Tonnes needed = Area (sqm) x Depth (m) x Density (tonnes/m3)**

Most gravel types have a density of approximately 1.8 tonnes per cubic metre when compacted. For loose decorative gravel, use 1.5 tonnes/m3.

Example: 20 sqm driveway with 150mm sub-base:

20 x 0.15 x 1.8 = **5.4 tonnes**

### Gravel Depth Guide

| Application | Recommended Depth | Gravel Type | Tonnes per 10 sqm |
|-------------|------------------|-------------|-------------------|
| Decorative garden border | 30mm | Pea gravel, slate chippings | 0.45 |
| Garden path (foot traffic) | 50mm | Decorative gravel, 10-20mm | 0.75 |
| Patio sub-base | 100mm | MOT Type 1 | 1.80 |
| Driveway sub-base | 150mm | MOT Type 1 | 2.70 |
| Heavy vehicle access | 200mm | MOT Type 1 | 3.60 |

These figures assume compacted density (1.8 t/m3). Order 10% extra to account for compaction loss and spreading variations.

### Gravel Types and Costs

| Gravel Type | Size | Density | Price per Tonne | Best For |
|------------|------|---------|----------------|----------|
| MOT Type 1 | 0-40mm | 1.8 t/m3 | EUR 25-40 | Sub-bases, foundations |
| Pea gravel | 10-20mm | 1.5 t/m3 | EUR 35-55 | Paths, decorative areas |
| Slate chippings | 20-40mm | 1.6 t/m3 | EUR 45-75 | Decorative mulch, borders |
| Golden gravel | 10-20mm | 1.5 t/m3 | EUR 40-60 | Driveways, paths |
| Crushed granite | 6-14mm | 1.7 t/m3 | EUR 35-50 | Paths, resin-bound surfaces |
| Limestone chippings | 10-20mm | 1.6 t/m3 | EUR 30-50 | Paths, cottage gardens |

Buying by the tonne is always cheaper than buying bags. A tonne of pea gravel costs EUR 35-55 loose delivered, compared to EUR 80-120 if bought as 25 kg bags (40 bags = 1 tonne).

### Bags vs Bulk Delivery

| Quantity | Bags (25 kg) | Cost (bags) | Bulk (tonnes) | Cost (bulk) | Savings |
|----------|-------------|-------------|---------------|-------------|---------|
| 250 kg | 10 bags | EUR 30-50 | Not available | - | - |
| 500 kg | 20 bags | EUR 60-100 | 0.5 tonne | EUR 20-30 | 50-60% |
| 1 tonne | 40 bags | EUR 120-200 | 1 tonne | EUR 35-55 | 65-70% |
| 2 tonnes | 80 bags | EUR 240-400 | 2 tonnes | EUR 60-100 | 70-75% |

For projects needing more than 500 kg, bulk delivery is significantly cheaper and saves hours of bag-opening. Check access for the delivery lorry — most tip directly from the truck and need a hard surface within reach of the chute.

### Compaction and Settlement

Loose gravel settles by 15-20% after compaction. If you need a finished depth of 100mm, order enough for 120mm depth. For MOT Type 1 sub-bases:

1. Spread in layers of no more than 50mm
2. Compact each layer with a plate compactor (hire for EUR 30-60/day)
3. Check levels with a spirit level and straight edge
4. The finished surface should be firm enough to walk on without sinking

Decorative gravel does not compact — it remains loose. Top up by 10-15% annually as stones migrate or sink into the ground. A weed membrane underneath prevents mixing with the soil. Use our [paving calculator](/paving-calculator) if you are laying stones on top of a gravel sub-base.

## Frequently Asked Questions

### How much gravel do I need per square metre?

At 50mm depth, you need approximately 0.09 tonnes (90 kg) per sqm. At 100mm depth, you need 0.18 tonnes (180 kg). The exact amount depends on the gravel type — decorative gravel is lighter than MOT Type 1 because the particles are more uniform.

### What depth of gravel do I need?

For decorative garden paths, 30-50mm is sufficient. For a patio sub-base, use 100mm. For driveways, use 150-200mm of MOT Type 1 compacted in 50mm layers. Thicker layers provide better load-bearing capacity.

### What is the difference between MOT Type 1 and decorative gravel?

MOT Type 1 is a graded crushed stone (40mm to dust) that compacts into a solid base — it is a structural material. Decorative gravel (pea gravel, slate chippings) is a loose surface layer that does not compact. They serve different purposes and are not interchangeable.

### How many bags of gravel do I need?

A standard 25 kg bag covers approximately 0.25 sqm at 50mm depth. For a 10 sqm path at 50mm, you need about 40 bags. For larger areas, buying by the tonne (bulk bag or loose delivery) is significantly cheaper per kg.

### Should I put membrane under gravel?

Yes. A weed-suppressing membrane underneath prevents weeds growing through the gravel. Without it, weeds will push through within 6-12 months. Overlap the membrane sheets by 150mm and pin them down before spreading the gravel.

---

Interactive version with calculator: https://renoquant.com/gravel-calculator. Figures are estimates; final quotes vary by site conditions, materials, and region.